i.MX53x module with MCIMX53x from NXP
DIMM module with Cortex-A9
Do you have growing requirements in the areas of HMI and cost-Efficiency?
The DIMM-MX53x addresses these requirements and offers a long-term availability of up to 15 years.
emtrions software specialists also provide you with in-house board support packages (BSP).
The operating systems Linux, Windows Embedded (WinCE6.0, WEC7, WEC2013), Windows 10 IoT, QNX, ThreadX, FreeRTOS and Android are available for the DIMM family.
Key features:
- NXP (Freescale) processor MCIMX53
- ARM Cortex-A9 processor
- up to 800MHz clock speed
- especially suitable for control tasks
- powerful 2D/3D graphics
- interfaces include: camera, Ethernet, 2x CAN, CPU-bus and LCD interface
- EtherCAT, PROFINET, CANopen optionally available
- industrial module (COM/ SOM), also available in extended temperature range
- up to 1GB RAM and up to 1GB NAND flash (SLC)
- scalable and long-term available
- Fastboot optionally available
- IoT capable
Choose the right developer kit from our versatile compilation for a quick start into your application development.
Product Information
| Current Revision | R3E |
| Status | mass production / perfective maintenance |
| Variants | DIMM-MX53x; DIMM-MX53x-ET |
| Temperature Range | 0°C – 70°C; opt. -40°C – 85°C |
| Size (WxDxH) | 67,6mm x 50mm x 10mm |
| Power Consumption | max. 1A |
| Special Functions |
|
| Supported Carrierboards |
Memory
| DDR3-SDRAM | 1024 MB | |
|---|---|---|
| NAND-Flash | 1024 MB | |
Connectivity
| Ethernet 100BASE-TX | 1 x |
|---|---|
| UART IrDA | 0 x |
| UART LVTTL | 4 x |
| UART RS232 | 1 x |
| USB Device 2.0 high speed | 1 x |
| USB Host 2.0 high speed | 1 x |
| CAN LVTTL | 1 x |
| I²C Interface | 1 x |
| SPI Interface | 1 x |
| Digital GPIO | 8 x |
| MMC/SDC Interface | 2 x |
| CPU-Bus | 1 x |
Multimedia
| Camera Interface 1 | 1 x |
|---|---|
| SSI Interface for Audio Codec | 1 x |
| LCD Interface (RGB) | 1 x |
| Camera Interface 2 | 1 x |
| LCD Interface (LVDS) | 1 x |
Miscellaneous
| RTC (battery buffered) | 1 x |
|---|
Special Functions
| CPU performance: up to 1 GHz - 2000 DMIPS | |
| Co-Processor: ARM NEON, VFPU | |
| Video processing (hardware accelerated): H.264 decode at 1080p30 and H.264 encode at 720p30 | |
| 2D (Hardware accelerated): openVG 1.1 | |
| 3D (Hardware accelerated): openGL ES 2.0 & 1.1 (33 Mtri/s, 200 Mpix/s, 800 Mpix/s z-plane), Direct3D Mobile 1.2 |
Supported operating systems
| Yocto | |
| QNX | |
| U-Boot | |
| Windows |
Power
| max Power | 1A |
|---|---|
| Voltage | 3,3V |
Operating temperature
| 0°C – 70°C | |
| -40°C – 85°C (extended) |
Mechanical dimensions
| Width | 67,6mm |
|---|---|
| Depth | 50mm |
| Height | 10mm |
| Name | Summary | File | ||||||
|---|---|---|---|---|---|---|---|---|
| Windows embedded Compact Kernel Description | Manual of the Developer Kit for Windows embedded Compact 7 |
|
||||||
| DIMM-MX53x Hardware Manual | Hardware manual for DIMM-MX53 modules with i.MX535 and i.MX537 SoCs |
|
||||||
| DIMM-MX53x (Identification Code) |
|
|||||||
| DIMM-MX53x (R3B) |
|
|||||||
| DIMM-MX53x (R3A) |
|
|||||||
| DIMM-MX53x | Errata Sheet |
|
||||||
| DIMM-MX53x (R3C) |
|
|||||||
| UART Translation Table | Overview for UART interfaces of CPU modules and baseboards. |
|
||||||
| GPIO Translation Table | GPIO Translation Table for DIMM-Series CPU Modules |
|
||||||
| DIMM-MX53x (R3E) |
|
|||||||
| U-Boot for DIMM-MX53-3 | U-Boot (binary file) and Display table on DIMM-MX53 boards with 512 MB RAM |
|
||||||
| Flyer DIMM-MX53 | Flyer of emtrion's DIMM-MX53 Module |
|
| Name | Summary | ||
|---|---|---|---|
| Cadun | DIMM series compliant baseboard for high performance CPU modules |
|
|
| Tarion | DIMM series compliant baseboard for high performance CPU modules including a miniPCIe slot for wireless network extensions. |
|
|
| DIMM-Debug | Debug-Board for emtrion's DIMM series CPU modules. |
|
| Question | |
|---|---|
| Additional Interfaces (DIMM-MX53) Is it possible to use additional interfaces or features, than mentioned in the HW Manual, without a redesign? |
|
| DIMM-MX537 vs. DIMM-MX535 What is the difference between the DIMM-MX535 and the DIMM-MX537? |
|
| Not needed pins (DIMM-MX53) How should not needed pins be connected on the baseboard? |
|
| Ports as PWM (DIMM-MX53) Which ports can be used as PWM output? |
|
| Power_on_Base Signal (DIMM-MX53) Must the baseboard support the signal POWER_ON_BASE signal? |
|
| Simultanous use of interfaces (DIMM-MX53) Are there any interfaces on the DIMMMX53x modules which can’t be used simultaneously? |
|
| Usage of BAT pin (DIMM-MX53) What must be considered if the BAT pin is not supplied by a battery from the baseboard? |
For more information on this product, please visit our SupportNet. For more information on this product, please visit our SupportNet.