SAMA5D36 SBC with Microchip ATSAMA5D36

Single Board Computer based on ATMEL ATSAMA5D36 with 256 MB RAM, 512 MB NAND, 2 x USB, Gb Ethernet, 100 MBit Ethernet

Product Information

Current Revision R4A
Status development ongoing
Temperature Range0°C – 70°C; opt. -40°C – 85°C
Size (WxDxH) 135mm x 74mm x 15mm
Power Consumption max. 300mA





Processor
CPU Clock (max) 536 MHz
CPU Cores
CPU Manufacturer ATMEL  
CPU Name SAMA5D36  
CPU Type Cortex-A5 
Security Module yes  

Memory
NAND-Flash 512 – 2048 MB
NOR-Flash 8 – 32 MB
DDR2-SDRAM 256 – 512 MB

Multimedia
LCD Interface (HDMI) 1 x
LCD Interface (RGB) 1 x
EDT Display via FFC Connector 1 x
Resistive Touch connectable yes x
Capacitive Touch connectable yes x
SSI Interface for Audio Codec 1 x

Connectivity
Digital GPIO 52 x
Ethernet 100BASE-TX 1 x
I²C Interface 3 x
MMC/SDC Interface 2 x
SPI Interface 1 x
USB Device 2.0 high speed 1 x
USB Host 2.0 high speed 2 x
Ethernet 1000BaseT 1 x
UART LVTTL 5 x
CAN LVTTL 2 x
SD Interface via microSD socket 1 x
PWM output 8 x

Miscellaneous
RTC (battery buffered) 1 x
5V Power Supply via 2 mm Power Jack yes  
Over- and Undervoltage protection yes  
Lithium Battery Charger yes  
Analog Input 5 x
5V Power Supply via USB yes  
User Buttons 2 x
User LEDs 4 x

If you need not listed features please contact emtrion!

Name Summary File
Hardware Manual SBC-SAMA5D36 Hardware Manual for SBC-SAMA5D36
Change date30.10.2015
TypeManual
LanguageEnglish
PCN_SAMA5D36_v001en Product Change Notification SBC-SAMA5D36, Rev 3
Change date30.10.2015
TypePCN
LanguageEnglish
PCN_SAMA5D36_v002en Product Change Notification
Change date09.05.2017
TypePCN
LanguageEnglish
SDCard SBC-SAMA5D36 Buildroot Xenomai test This SDCard image is for test purposes only! You will need at least a 2GB micro SDCard. it includes a Linux Kernel v3.14.17 patched with Xenomai and a simple RootFS made with Buildroot. Login:root Password:hico
Change date04.08.2017
TypeBSP
LanguageEnglish
SDCard SBC-SAMA5D36 production This archive contents everything you need to reprogram your SBC-SAMA5D36 (for all R2/R3/R4 boards) NAND Flash. You will need a micro SDCard of at least 1GBytes. How-to: - Uncompress the image with this command line: tar Jxvf archive.tar.xz output.img (for example: tar Jxvf sbc-sama5d36_prod.img.tar.xz sbc-sama5d36_prod.img) (md5sum of extracted image: f9950709ab511860eb5764d56a7259f6 ) - Copy into a SDCard with this command line: sudo dd if=sbc-sama5d36_prod.img of=/dev/sdX bs=4M - Plug the SDCard into your SBC-SAMA5D36 and power on the board. login: root Password: hico - run ./production-script.sh Normally, the update archive doesn't contain the newest root filesystem. To be sure we recommend to update the root file system after reprogramming. Updating of the root filesystem is described in the corresponding manual WARNING: All the previous data in the NAND Flash will be erased! This also means that the U-Boot environment is reset. Please check MAC Addresses, serial number, board revision using "printenv" in U-Boot before updating to be able to set them during the update.
Change date23.11.2017
TypeBSP
LanguageEnglish


Name Distribution Version Codename
Linux Buildroot Xenomai 2.6.4

Details

Linux Yocto 1.7.2 Dizzy

Details

Linux Debian 8.x Jessie

Details



Summary
Developer Kit for Atmel-SAMA5D36 and Linux, headless

Details

Developer Kit for IoT application with Atmel SAMA5D36 and Linux, headless

Details



Name Summary
Display ETM0700G0BDH6 WVGA display (800x480 Pixel) with capacitive touch screen.

Details

SBC-Case Case for SBC-SAMA5D36, aluminium, optional DIN-Rail assembly

Details

SBC_EXT1 The SBC-EXT1 module is a simple serial extension module for the CPU module SBC-SAMA5D36.

Details

IOT-EXT1-2 IOT Extension Board for SBC-SAMA5D36 with WiFI Interface, TPM and I/O connectors

Details



Question
Using JTAG on SBC-SAMA5D36
The SBC-SAMA5D36 has a 10pin JTAG Connector. How can I connect it to the 20pin connector of my debugger?

Details


Back